Email: sales@compasshandrails.com       WhatsApp: +86-13573291015
NEWS
Home » News » News » Introduction of Aluminum Die Casting Parts

Introduction of Aluminum Die Casting Parts

Views: 326     Author: Site Editor     Publish Time: 2022-04-26      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button


Aluminum die-casting parts are a kind of pressure casting parts, is to use the pressure casting machinery Die Casting machine which is loaded with casting molds, and then pours the aluminum and aluminum alloy heated to a liquid state into the inlet of the die-casting machine, it can cast aluminum parts and aluminum alloy parts, such parts are usually called Aluminum Die Casting Parts.


Here is the content list:

l Advantages of Aluminum Die Casting Parts

l Process flow of Aluminum Die Casting Parts

l Application of Aluminum Die Casting Parts


Advantages of Aluminum Die Casting Parts

1. The density of aluminum and aluminum alloys is lower than that of cast iron and cast steel, but the strength and corrosion resistance is much higher. Therefore, under the same load weight, the use of Aluminum Die Casting Parts can reduce the structural weight of the load.


2. Aluminum Die Casting Parts have a high utilization rate. Due to its high precision, it can be assembled and used only after a small amount of machining, and some aluminum dies castings can be directly assembled and used.


Process flow of Aluminum Die Casting Parts

The process flow of die-casting aluminum industry is annealing, normalizing, quenching, and tempering. These four processes are called "four fires" in Die Casting. It is understood that annealing is to heat the casting. When heated to the appropriate temperature, the Die Casting Part is slowly cooled according to the different materials used, and the internal structure of the metal has reached a near-equilibrium situation. Normalizing is to heat the casting to a suitable temperature and then cool it in air, which is mainly used to improve the cutting performance of the material. Quenching is to heat and heat the workpiece and then rapidly cool it in a quenching medium such as water or other inorganic salt solutions. After this process, the produced Die Castings will become hard and brittle. Tempering is to reduce the brittleness of die castings. The quenched castings can be placed at a temperature below 650 degrees Celsius and higher than normal temperature for a long time, and then cooled.


Application of Aluminum Die Casting Parts

Because metal aluminum and aluminum alloy have good fluidity and plasticity, and the casting process is cast in a pressure die-casting machine, Aluminum Die Casting Parts can make various complex shapes, and can also make high accuracy and smoothness, thus greatly reducing the machining amount of casting part and the casting allowance of metal aluminum or aluminum alloy, not only saves electricity, metal materials but also greatly saves labor costs; and aluminum and aluminum alloys have excellent thermal conductivity, so aluminum dies castings are widely used in automobile manufacturing, internal combustion engine production, motorcycle manufacturing, motor manufacturing, transmission machinery manufacturing, precision instruments, landscaping, power construction, architectural decoration, and other industries.


The above is the relevant content about the introduction of Aluminum Die Casting Parts. If you are interested in Die Casting, you can contact us, our website is https://www.compass-casting.com/. I look forward to your arrival very much and hope to cooperate with you.


Contact us
Sign up for our newsletter

QUICK LINKS

OUR PRODUCTS

CONTACT US

 : +86-13573291015
 : +86-532-80913852
Copyright © Qingdao Compass Hardware Co.,Ltd.All Right Reserved. Sitemap | Supported by leadong.com